Puits d’inspection en plastique PP

Plastic manhole is usually called “inspection well”, which is placed at interchange and turning point of drainage pipes, changes and plunge of caliber or slope, and in straight pipe at each certain distances. It is an affiliated drainage structure used to check, clean and dredge the pipes regularly. Our plastic manhole is made of Polymer Resin, adopts combinative structure and consists of manhole base, manhole shaft, manhole cover, cover base and concrete supported plate, etc. The critical manhole base adapts one-time molding, which can produce all types of manholes for two-way, three-way, Cross Tee 90°-165°any interchange. It uses reduce union, variable angle union and seal ring to change the connection of caliber and angle. Our manhole shaft uses PE pipe, corrugated pipe or winding pipe to adjust itself, so it is very much flexible, we can intercept the corresponding length according to the site buried length. We use rubber seal ring at the connection of manhole shaft, inlet (outlet) pipe and manhole base, so that small inner angle changes can be made. Wholesale best price high quality HDPE Plastic inspection Well.

PP Plastic Inspection Well Benefits:

No leakage, sealed connection between pipe and well.

Easy to carry and fast construction.

Corrosion of acid and alkali resistant media, long service life.

Convenient pipeline clearing, minimal maintenance.

Small footprint，small excavation area.

Cost-effective and strong carrying capacity.

Environmentally friendly building materials, recyclable.

 

 

PP Plastic Inspection Well Application:

1.Well pit and foundation

1）Pave the bottom of the ditch with appropriate fine sand or plain soil, and level it.the pit depth is determined according to the axial line of the pipe and the axial line of the well joint.

2）Ditch bottom leveling.

3）1 meter inspection well, two people can easily put into the trench.

2. Inspection well connection pipe installation instructions

4) Measure the depth of the inspection well with a tape measure with a precision of 1 mm, Drawing line on the corresponding pipe sockets as mark, and install a suitable rubber sealed loop between the first and second peaks of corrugated pipe socket end. The pipe must be inserted into the marking position when assembling.

5) In order to make the installation easier, it is necessary to apply a lubricant (such as soapy water, detergent, etc.) evenly on the outer surface of the seal ring on the pipe and the inner surface of the inspection well socket.

6) Pull the pipe into the well seat socket with a tightener, pull in the depth to the marking mark on the pipe, pull the wire tightener, and after confirming the link in place, correct the well seat again with the level.

3. Pitshaft installation

7) The length of the pitshaft should be the height from the bottom of the wellhead to the design ground minus the height from the top of the pitshaft to the ground. When the surface or pavement elevation is difficult to determine, the appropriate margin can be left.

8) Special tightening tools should be used when inserting the pitshaft, and do not hit it with heavy hammer and keep it vertical.

4. Backfill

9) Linking the pitshaft to the well block.

10) Working in the ditch.

11) Installing the manhole cover.

5.Manhole cover installation

12) Symmetrical backfilling of fine sand or plain soil.

13) Compaction after backfilling.

14) Lift the pressure ring into the pitshafte to be installed, gently lower the axial line of the pitshaft (manually corrections is allowed if necessary), install the manhole cover on the pressure ring and backfill it until completion.

 

Products Description

 

JK-315
Category	Support pipe type	Poids (KG)		Weigh (KG)			Category	Support pipe type	Poids (KG)		Poids (KG)
Start well	200Un(237mm)	2.5		2.89			90°	200Un(237mm)	2.98		3.33
	200B(208mm)	2.5		2.82				200B(208mm)	2.83		3.56
	225Un(266mm)	2.86		3.14				225Un(268πm)	3.4		3.76
Straight-way	200Un(237mm)	2.99		3.33			45°	200Un(237mm)
	200B(208mm)	2.84		3.19				200B(208πm)
	225Un(266mm)	3.5		3.77				225Un(266mm)
Three-way	200Un(237mm)	3.37		3.76			Four-way	200Un(237mm)	3.75		4.2
	200B(208πm)	3.17		3.56				200B(208πm)	3.78		3.93
	225Un(266mm)	3.99		4.38				225Un(266πm)	4.55		5
JK-450
Category	Support pipe type	Poids (KG)		Poids (KG)			Category	Support pipe type	Poids (KG)		Poids (KG)
Start well	200Un(237mm)	5.05		5.7			90°	200Un(237mm)	5.35		5.7
	225Un(266mm)	4.6		5				225Un(266πm)	5.2		5.6
	300Un(354πm)	5.5		6.2				300Un(354πm)	6.6		7.2
Stiaicht-way	200Un(237mm)	5.35		5.7			45°	200Un(237πm)
	225Un(266mm)	5.2		5.6				225Un(266πm)
	300Un(354mm)	6.5		7.5				300Un(354mm)
Three-way	200Un(237mm)	5.5		5.7			Four-way	200Un(237mm)	5.95		5.67
	225Un(266mm)	5.7		6.1				225Un(266mm)	5.95		6.7
	300Un(354mm)	8.15		8.17				300Un(354πm)	8.6		8.57
JK-630
Category	Support pipe type	Poids (KG)		Poids (KG)			Category	Support pipe type	Poids (KG)		Weigh (KG)
Start well	200(240mm)	8.5		9.9			90°	200(240mm)	8.8		10.3
	225(268mm)	8.7		10				225(268mm)	9.2		11.2
	300(354mm)	10.4		11.5				300(354mm)	11.1		12.4
	400(473mm)	12.1		13				400(473mm)	13.8		14.8
Staight-wa	200(240mm)	8.9		10.3			45°	200(240mm)
	225(268mm)	9.3		10.6				225(268mm)
	300(354mm)	11.3		12.4				300(354mm)
	400(473mm)	13.9		14.8				400(473mm)
Three-way	200(240mm)	9.2		10.7			Four-way	200(240mm)	9.6		11.1
	225(268mm)	9.8		11.2				225(268mm)	10.4		11.8
	300(354mm)	12.1		13.3				300(354mm)	13		14.2
	400(473mm)	15.7		16.6				400(473mm)	17.5		18.4
JK-700
Category	Support pipe type	Poids (KG)		Poids (KG)			Category	Support pipe type	Poids (KG)		Poids (KG)
Start well	200(240mm)	9.1		10.5			90°	200(240mm)	9.5		10.9
	225(268mm)	9.3		10.6				225(268mm)	9.8		11.2
	300(354mm)	9.9		11				300(354mm)	10.6		11.9
	400(473mm)	12.6		13.5				400(473mm)	13.8		15.3
trai Wa	200(240mm)	9.5		10.9			45°	200(240mm)
	225(268mm)	9.9		11.2				225(268mm)
	300(354mm)	10.8		11.9				300(354mm)
	400(473mm)	14.5		15.3				400(473mm)
Three-way	200(240mm)	9.8		11.3			Four-way	200(240mm)	10.2		11.7
	225(268mm)	10.4		11.8				225(268mm)	11		12.4
	300(354mm)	11.5		12.8				300(354mm)	12.5		13.7
	400(473mm)	15.7		17.1				400(473mm)	17.5		18.9
JK-1000
Category	Support pipe type	Poids (KG)		Weigh (KG)			Category	Support pipe type	Poids (KG)		Weigh (KG)
Start well	300(354mm)	21.3		25.2			90°	300(354mm)	21.7		25.5
	400(478mm)	25.3		27.3				400(478mm)	26.2		28.1
	500(583mm)	27.3		29.3				500(583mm)	28.8		30.8
	600(703mm)	31.4		35				600(703mm)	34.37		38.2
	800(951πm)	40.2		43.2				800(951mm)	46.1		49.1
Sraight-way	300(354mm)	21.7		25.5			45°	300(354mm)
	400(478mm)	26.6		28.1				400(478mm)
	500(583mm)	28.8		30.8				500(583mm)
	600(703mm)	35.5		37.86				600(703mm)
	800(951πm)	47		50.1				800(951mm)
Three-way	300(354mm)	22.1		25.9			Four-way	300(354mm)	22.4		26.2
	400(478mm)	27.9		28.9				400(478mm)	28.27		29.7
	500(583mm)	30.3		32.3				500(583mm)	31.7		33.8
	600(703mm)	38.5		41.6				600(703mm)	40.1		42.9
	800(951πm)	52		55				800(951mm)	57		60

Détails d’emballage: Our PP Plastic Inspection Well are securely packed in containers or as per customer requirements, s’assurer qu’ils vous parviennent en parfait état. We use robust materials for packaging to protect the PP Plastic Inspection Well during transit, S’adaptant à différentes tailles et quantités.

Détails de livraison: Nous garantissons un processus de livraison rapide, avec des commandes expédiées dans un délai 15 jours suivant la confirmation du paiement. Notre réseau logistique efficace garantit que votre commande arrive rapidement et en toute sécurité, quel que soit l’endroit où vous vous trouvez. Nous nous efforçons de respecter des délais serrés tout en maintenant les plus hauts standards de service et de qualité des produits.

Vous trouverez ci-dessous notre image détaillée

Zhongtong a obtenu diverses certifications, y compris la certification nationale d’entreprise de haute technologie, Certification de service après-vente cinq étoiles, Certification du système de gestion de la qualité, et la certification du système de management environnemental. L’entreprise dispose d’une clientèle diversifiée, ayant servi plus de 2,680 Grandes entreprises, y compris des institutions prestigieuses comme l’Université des sciences et technologies de Nanjing, Université du Zhejiang, organismes gouvernementaux tels que le Bureau des affaires de l’eau de Taicang, des installations de premier plan comme la gare ferroviaire à grande vitesse de Changzhou, et des entreprises bien connues telles que Nongfu Spring, Groupe de jardins de campagne, et la ligne de métro de Nanjing 4.

Q: Quel est votre MOQ?

Un: En tant que demande du client.

Q: Pourquoi nous choisir?

Un: Nous sommes un professionnel et leader de l’usine de tuyaux en PEHD, Nous offrons des services à guichet unique de système de pipeline avec des prix compétitifs et un délai de livraison rapide, et nous veillons à ce que notre qualité soit inégalée.

Q: Comment acheter le produit?

Un: Contact avec nous par email ou par directeur commercial, et informez-nous du produit et de la quantité dont vous avez besoin, nous contacterons

vous immédiatement. Plus précisez les informations que vous avez fournies plus rapidement et plus facilement, vous obtiendrez le devis.

Q: Puis-je faire mon propre design et logo sur le produit?

Un: Oui, nous faisons OEM. Bienvenue partenaire du monde entier, nous pouvons faire votre produit en Chine.

Q: Quel est le délai de paiement?

Un: Montant de la commande <= 1 000 USD, 100% En avance. Montant de la commande>= 1 000 USD, 30% T/T à l’avance, solde avant expédition.
Montant de la commande>20,000USD, 30% T/T à l’avance, équilibre L/C à vue acceptable.
Montant de la commande>100,000USD, 100% L/C à vue acceptable.

Q: Vous avez encore d’autres questions?

Un: Veuillez utiliser le tableau ci-dessous et nous envoyer vos questions. Merci.